Craftmade TCS Manual do Utilizador Página 1

Consulte online ou descarregue Manual do Utilizador para Controlos remotos Craftmade TCS. Installation Sheet Manual do Utilizador

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 14
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 0
Installation Instructions
Instrucciones de instalación
Instructions d’installation
BL52
Bloom Ceiling Fan
Vista de página 0
1 2 3 4 5 6 ... 13 14

Resumo do Conteúdo

Página 1 - Bloom Ceiling Fan

Installation InstructionsInstrucciones de instalaciónInstructions d’installationBL52Bloom Ceiling Fan

Página 2 - Trouble Shooting

Lift fan onto the mounting bracket (#1). Turn housing until hanging ball seats itself into ball socket (listen for click).WARNING: To reduce the risk

Página 3 - What You Have

White (Neutral)GroundWhiteBlackWireConnectors (S6)Ground(Green)Blue Black (Power)Outlet BoxGround (Green)Downrod Ground(Green)Mounting BracketGround (

Página 4

Attach canopy (3) to the mounting bracket by placing screws (S2) into slot in canopy. Twist clockwise to lock into place. Seat the canopy screw cover

Página 5

Slide the small pedal blades into place, support andattach with screws. (S4)Screw in candelabra light bulbs. (not included)Place light kit glass over

Página 6

ON/OFF For emergency shut off.HIGH Controls fan motor speed. To select desired speed, press MEDIUM button once and release.LOW REVERSE Controls

Página 7

Trouble ShootingProblem A: Fan Will not Start Remedies: 1. Check fuse or circuit breaker and replace if necessary 2. Turn off electrical power

Página 8

Before Assembly1. Make sure that the fan voltage (120) is compatible with your own electrical system.2. Check to make sure that your c

Página 9

Turn off circuit breakers and wall switch to the fan supply line leads. 30”84”IMPORTANT: If using the angle mount method, check to make sure the ceilin

Página 10

OUTLET BOXOutlet Box (A)Mounting Bracket (1)Bracket Screws & Washers (S3)Support BeamWood Screws (S1)Canopy Screws (S2)CeilingWood Screws (S1)“J”

Página 11

Unscrew and remove motor housing washer and motor housing top plate. Attach Large Pedal Blades from Top of Motor Housing.5

Página 12

Reattach the Motor housing Plate and Motor Housing Washer as shown.Make sure the antenna wire is threaded through hole on top of motor housing.Downrod

Página 13

Tighten set screw (A) against downrod.Insert safety bolt (S7) through flange & downrod and attach nut. Tighten firmly.read the downrod onto the mot

Página 14

Place flange cover (4) over downrod assem-bly. Attach antenna wire to flange cover. Place canopy screw cover over downrod. Place canopy (3) over downro

Comentários a estes Manuais

Sem comentários