Craftmade TCS Manual do Utilizador

Installation InstructionsInstrucciones de instalaciónInstructions d’installationJU54JunaCeiling Fan

8Lift fan onto the mounting bracket (#1). Turn housing until hanging ball seats itself into ball socket (listen for click).WARNING: To reduce the ris

92. After connections are made, turn splices upward and push carefully into outlet box. Separate black wires on one side of the box, white and green w

10Remove two screws from the hanger bracket and reserve. Align the canopyup to ceiling and over the screw holes. Secure the canopy by tightening the r

11Remove one of the three set screws on the mounting ring and loosen the other two screws, do not remove.Snap the light kit connection plugs before in

Remote Control Operation InstructionsON/OFF For emergency shut off.SPEED Controls fan motor speed. To select desired speed, press CONTROL button

IMPORTANT! PLEASE READ:All Craftmade Ceiling Fans are prepared with a durable lacquer or a painted finish. Your proper care will enhance both the life

1Read and Save ese Safety Precautions 1. Turn off electricity at main switch before wiring or servicing fan in order to avoid possible electrical

2Before Assembly1. Make sure that the fan voltage (120) is compatible with your own electrical system.2. Check to make sure that your carton contains

S8 S7 S5 S6 S1 S2 S4 S3 Screw PackageS1. Wood Screws & WashersS2. Bracket ScrewsS3. Blade Screws & Paper WashersS4. Blade Arm ScrewsS5. W

3Turn off circuit breakers and wall switch to the fan supply line leads. IMPORTANT: If using the angle mount method, check to make sure the ceiling ang

4OUTLET BOXOutlet Box (A)Mounting Bracket (1)Bracket Screws & Washers (S2)Support BeamWood Screws (S1)CeilingWood Screws (S1)“J” Hook (S7)Installi

5Downrod AssemblyLocate downrod assembly (#2). Loosen ball screw on black hanging ball to free lock pin. Black hanging ball will slide down. Remove gr

6Tighten set screw against downrod.Insert saftey bolt (S6) through flange & downrod and attach nut. Tighten firmly.read the downrod onto the motor

7Place Flange Cover (6), Anti-Sway Adapter (5) and Canopy (4) over downrod assembly.Replace hanging ball, insert hanging pin through downrod and tight